Double Glazed Door Lock Replacement
Double glazed door lock replacement can seem like a daunting job, but with the proper tools and step-by guideline, it's manageable. Replacing your window lock can increase the energy efficiency of your office or home and provide additional security.
Start by removing the screw that holds the faceplate of the lock cylinder. Use a screwdriver to turn it to the left before removing the cylinder.
Replacement Cylinders
Euro lock door cylinders or barrel locks, are present in the majority of uPVC double-glazed doors and provide proven security and dependability. Replacing a cylinder is often required due to a key being stolen or lost, but also because of the aging process and the possibility of corrosion. Cylinders are available in various sizes and styles, as well as finishes to match your door. Depending on the requirements of your home you can choose between cylinders with 1-star or 3-star ratings. The cylinders are protected by BSI Kitemarks that are approved for insurance.
Cylinder locks use a simple pin and barrel system that has been utilized in uPVC door for many years. The drawback of these locks however is that burglars can easily manipulate them with tools to "snap" and gain access to the home. We suggest that you replace your cylinders with snap-resistant cylinders to protect yourself from this common burglary technique.
To remove the old cylinder first of all open your door and locate the screw that is located on the edge of the door between the outer handle and the handle inside. This screw will usually stand out from the rest of the screws because it is a different colour. The screw can be removed completely using an screwdriver. If the screw is unable to budge then try applying some 3 in 1 type oil and letting it sit for a few hours or so. This could aid. Alternately, you could work the screw's head in the direction of unscrewing to shock it loose.
After removing the handle screws, loosen the cylinder by turning it in any direction (the direction will depend on the side of your door the locking mechanism is located). Once the cylinder has become loose, pull it toward you and take it off. Check the cylinder's diameter and length prior to purchasing a replacement.
We provide a variety of half and full cylindrical cylinders and a selection of specialised security cylinders rated both for anti-snap resistance as well as anti-bump. These cylinders are BSI kitemarked and Secured by Design accredited and provide high levels of physical security for your home.
Replacement handles
If you're replacing handles on the uPVC front door then there are many styles and colors to pick from. But the most important thing is that the new handle is positioned correctly. The keyhole size and screw size will both have to be matched in addition. The best way to check is by using our handy guide on measuring for uPVC handles. This will ensure you get the best measurements and purchase the right handle. It's also worth considering upgrading to a security set of handles. This will make your uPVC door more secure, and will stop thieves from being able open the lock.
You should be able to find replacement handles for your double glazed doors from the majority of major uPVC handle suppliers. door lock repairs hastings can choose from a vast variety of lever and handles with different finishes from companies such as ERA, Avocet and Millenco. You can pick one that comes with a snib for additional security.
Depending on what you need in the future, you may need to replace the entire handle or just the lever. This is typically due to wear and tear but can also be caused by an issue with the mechanism of your lock. If your lock is faulty, it's best to contact an Locksmith. However, if you're only looking to replace the handle of the lock, you are able to do it yourself.
Once you've made your measurements after which you can compare them with the dimensions of replacement handles that are available on the market. The most common size for uPVC door handles is the 92pz size, but there are also 70pz or 68pz sizes. The new handle must have a backset as well as a faceplate that are compatible. This will ensure the screw holes are properly aligned and the lock in the door is not damaged.
If you're replacing the handles on your door and would like to upgrade to a higher security level, then it's recommended to look into Sold Secure SS301 or 2* Kitemark handle set. These handles are safe because they have been approved by the police, and they have anti-drilling as well as anti-picking features.
Faceplates for replacement
Door keeps and faceplates serve as a last defense against burglars. They show them that your home is safe and stop them in their tracks. They have a significant role to play and should be purchased from a trusted hardware store, whether online or in person. This will ensure that you receive a sturdy device that will shield your doors and windows from corrosion and damage over time.
It is also important to be aware of the distinctions between multipoint uPVC lock and single point one, they can differ just as much as apples versus oranges. Depending on which you're installing, you'll have to select the right faceplate and backset, a backset is the distance between edge of the door and centre of handle or cylinder and a 'faceplate' is a metal strip that covers the edges around mechanisms. These are the main factors that will determine which replacement parts you need for your new uPVC locking system. It's then a matter of following the instructions for fitting them!
Replacement locks
Based on your preferences There are many choices available to the replacement of locks for uPVC doors. These locks are designed to resist forces and provide greater security for your home. There are uPVC multipoint locking systems that are suitable for commercial use. These are usually supplied by reliable companies, like Fullex centre lock gearboxes or Gardinia door locks made of UPVC.
When choosing a new lock for your window, it is important to know the type of backset you require and the faceplate that you require. To ensure that the lock is secure and fits correctly and is compatible with your existing lock, ensure that you match the backset and faceplate. If your lock has a 35mm spindle as well as a backset of 35mm it is recommended to buy a new uPVC handle with a gearbox that is compatible, such as the Laird Saracen surelock.
You should also make sure that the lock you choose is the same size of the handle as well as the faceplate holes on the windows you have already. This is essential to ensure seamless integration between the handle and the window lock.
Install the new lock into your window once you've chosen the right one. In this process, it's recommended to speak with your local locksmith since they'll be able to assist you in finding the right match. You should also test the new lock.
In order to avoid this, you must replace your double-glazed windows with a top-quality lock that is resistant to forced entry. This will protect your valuables and keep your family safe from burglars. The replacement of window locks will increase the security of your home at a an affordable cost. However, the process isn't easy when you aren't familiar with the procedure. To succeed in this task you should follow these steps.